• Welcome to Bare Knuckle Pickups Forum.
 

NAPWP(S)D! {BKP Content}

Started by Philly Q, March 18, 2012, 04:55:42 PM

Previous topic - Next topic

Philly Q

New Aged Pre-Wired Pickguard (Scratchplate) Day!


This arrived from BKP yesterday morning.

Anyone experiencing a touch of deja vu at this point may remember Nolly's thread about his Custom Shop Relic Strat:

https://bareknucklepickups.co.uk/forum/index.php?topic=25139.0


In my defence, I'm not a total copycat - it was always going to be aged cream on tortoise, and I was 95% decided on HSS rather than SSS.  But Nolly's thread certainly made me decide on a complete pre-wired setup from BKP (rather than buying separate bits), and also helped with the choice of pickups - I was going back and forth between some combination of Crawler, VHII, Abraxas, Mother's Milks, Irish Tours or Slow Hands.  Crawler was favourite for a long time, but in the end I've gone for.... Abraxas and a pair of Slow Hands.

I wasn't sure about pot values - I was thinking about 250k rather than 500k because I really didn't want the single-coils too bright/harsh, or maybe 500k volume and 250k tones, but Tim suggested 300k for all three pots, which seemed a good compromise.  The cap is a Jensen/BKP 0.022.  Wiring is the "standard" HSS setup with a RW/RP middle pickup and the humbucker split in position 2.

It all looks great - excellent relic work all round and super-neat wiring.   :D

Now I suppose I need to get the thing put together at last....  :|


BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

Telerocker

Looks superb! Great pickupchoice too.
Mules, VHII, Crawler, MM's, IT's, BG50's.

Ian Price

That looks great Philly! What section of your bed is it going under?  :D
I think I hate being indecisive.

Roobubba

Quote from: Ian Price on March 18, 2012, 06:06:41 PM
That looks great Philly! What section of your bed is it going under?  :D

:D
[url=http://www.myspace.com/13gauge]13Gauge, Oxford-based band. Hardcore just got harder.[/url]

roland_rat

Very nice. What guitar are they going in?
Mules/SM,RR,YB, boss/ IT, VHII,   VHII & Mothers Milk, Abraxus, SM/aphache, sultans

Philly Q

Quote from: roland_rat on March 18, 2012, 06:27:45 PM
Very nice. What guitar are they going in?

Quote from: Ian Price on March 18, 2012, 06:06:41 PM
That looks great Philly! What section of your bed is it going under?  :D


It's going in the section where I keep the bits for my relic hardtail Strat project  :P :


BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

roland_rat

Should look rather tasty with that guitar body. What neck you having with it.  Maple or Rosewood?
Mules/SM,RR,YB, boss/ IT, VHII,   VHII & Mothers Milk, Abraxus, SM/aphache, sultans

Ian Price

That looks like a great body Philly - are you going to rout it out yourself?
I think I hate being indecisive.

dave_mc


gordiji

congrats, i'm sure it'll serve you well. when i got my IT pre wired i was equally impressed with the wiring and by the time i would have sourced all the bits i don't even think it was more expensive.
even if i sold the guitar the IT board would stay with the old one going back in hassle free and untouched.

Philly Q

Quote from: gordiji on March 18, 2012, 07:35:26 PM
when i got my IT pre wired i was equally impressed with the wiring and by the time i would have sourced all the bits i don't even think it was more expensive.

Yeah, if I'd bought the same set of BKP pickups, pots, switch etc, plus a scratchplate and plastic parts (probably from Fatboy Guitars), I reckon the total cost would have been at least as much, maybe more.  It seemed like a no-brainer!  :D


Quote from: Ian Price on March 18, 2012, 07:00:30 PM
That looks like a great body Philly - are you going to rout it out yourself?

Yep.  I have a trusty humbucker routing template I made years ago, should do the trick!  I had to wait to actually get the scratchplate because the position of the humbucker varies quite a lot between different manufacturers.


Quote from: roland_rat on March 18, 2012, 06:56:47 PM
Should look rather tasty with that guitar body. What neck you having with it.  Maple or Rosewood?

It's a Fender neck with a rosewood board.  A certain Mr Venables has done a very nice relic job on it for me.  :) 

I'm going for a mid-'60s pre-CBS look, but not trying to get all the details slavishly correct (for example my neck has a slab board when it should really be veneer to be period-accurate!)
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM

horsehead

tasty on both fronts mate, congrats!
"Praising Phil X for his enthusiasm seems a bit like praising Hitler for his ambition"

gwEm

Quote from: gordiji on March 18, 2012, 07:35:26 PM
congrats, i'm sure it'll serve you well. when i got my IT pre wired i was equally impressed with the wiring and by the time i would have sourced all the bits i don't even think it was more expensive.
even if i sold the guitar the IT board would stay with the old one going back in hassle free and untouched.

agree, those pre-wired guards work out pretty decent value i think
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

gwEm

aging looks good philly - i have real faith you might finish a project soon :) you must have all the bits now!
Quote from: AndyRyou wouldn't use the meat knife on crusty bread but, equally, the serrated knife and straight edge knife aren't going to go through raw meat as quickly

Philly Q

Quote from: gwEm on March 18, 2012, 08:56:13 PM
aging looks good philly - i have real faith you might finish a project soon :) you must have all the bits now!

I must admit I have, in this case. 

In fact I have a few more bits than I need, because I wasn't happy with some of the "relic" parts I bought - sometimes they're a bit over-done.
BKPs I've Got:  RR, BKP-91, ITs, VHII, CS set, Emeralds
BKPs I Had:  RY+Abraxas, Crawlers, BD+SM